top of page
Search

ADENA Hack: How to record and stream in 4K using the LS-410 Media Station?

One of the defining features of the LS-410 Media Station is its support of the 4K recording and streaming mode. You can enable the 4K mode by opening the ‘Administrator’ web page of your station. Proceed to ‘Video’ -> ‘Recording’, and select ‘User Defined’ in the list of preset video compression profiles. An ellipsis ‘...’ button will appear when you do so — click on it. This will open a menu where you can adjust the recording parameters of your station. To enable 4K, change the resolution to 3840x2160 and set the average bitrate to 8mbps. Pressing ‘Save’ will prompt a message describing the changes that enabling 4K involves. Press ‘Confirm’ and the Media Station will reboot in the 4K mode.

Please note that while the LS-410 is in 4K mode, it will use the same video profile for both recording and streaming operations, so you only need to set one of these profiles to enable 4K for everything. To learn more about the LS-410 and its features, don’t hesitate to contact us at www.a-dena.com! We are always happy to assist you.

43 views

Comments


bottom of page